RedRock Cold Air Intake (12-14 3.5L EcoBoost F-150)
$159.99
In Stock
Chat with us
Have a question? Ask a Specialist.
+1 (902) 361-8221 Start Live Chat
Description
Better Flow for More Power. You will see and feel a noticeable increase in both horsepower and torque, just by replacing your EcoBoost’s restrictive stock intake with a RedRock high flow filter assembly. This RedRock Cold Air Intake will enhance both the power and performance of your 2012-2014 3.5L EcoBoost powered F-150.No Tune Required. RedRock engineered their Cold Air Intake to improve the performance of your EcoBoost F-150 without the need of reprogramming the computer. By utilizing…
Related products
RickA –
Easy to install and improved performance and fuel mileage.
Miggle –
So as others have said the hardware is a little janky. And the fit on the lower airbox is a little janky. But for the price you pay you get a decent kit that seems to give you quicker spool and more pull according to the butt dyno. Noise is more noticeable at part throttle. You’ll need an M4x.7 thread screw, about 25 mm in length plus an M4 washer to hold the MAP sensor in place. Rest of the hardware that holds the heat shield together is good enough.
Jayboost –
Easy install, did this and a MPT 93 PRX tune at the same time.
Schmidt –
quick and easy to install. no noticeable gains. maybe a little intake sound added but if you’re looking for the dump or whistle, you’ll need more than just this
Nicks2358 –
The good… Quality parts. Easy installation. Sufficient instructions to do so. The bad… M8 screw for the air pressure sensor is too short. The screw head slides through the sensor whole also. You will need to purchase an M8x12 screw and washer. New sensor housing is aluminum so I would suggest stainless hardware, should also use locktite. The pressure sensor o-ring needs to be greased to prevent cutting it when you install the sensor, should have mentioned that in the instructions. The filter heatshield is a sloppy fit to the stock air box bottom. Heatshield holes are cut too low for existing air box clips to hold it tight. Was worth the 80 dollar clearence price.
jim –
Fit good with no problems. No dash light on either. Put in same time as new 4″ exhaust.
Portius –
Great product for the price. Great upgrade for EcoBoost
Fiso –
This was super easy to install with one exception. The air sensor screw supplied with the kit was way too short to mount the sensor. Do to the design change of this one screw it also eliminated the post to mount the strain relief for the air sensor wiring. A trip to the hardware store was needed to get the correct length screw. Other than that, this kit was a good value and looks good. It improves the turbo sound by making it noticeably louder.
ChaseG –
Very simple install. Directions are pretty straight forward and its for a great price.
Furrdguy –
The screw for mounting the stock air sensor is too short and narrow with no washer included so you’ll have to find another screw (stock screw will not fit with this kit). The box around the filter only has 2 spots for clips while the truck has 3. The box doesn’t sit tight because the clips don’t quite line up perfect. Unless they somehow sent the wrong product, don’t waste your money on this. I’m blown away how someone could make such a half as**d kit